The 10 Best Plasma Cutters 2020

ost individuals are acquainted with solids, liquids, and gases, however there’s an extra type of matter that’s particularly helpful for chopping steel. A robust different to oxyacetylene torches, plasma cutters use a powerful burst of electrical energy to show pressurized air into an extremely scorching arc. They will slice by way of metal as much as about an inch thick, and a few additionally enable for TIG and stick welding

1. Lotos LT3500

Weighing in at solely 18 kilos, the Lotos LT3500 (appx. $195) is among the best to move to and from a job web site. It is designed for the comparatively easy activity of breaking down scrap and, at simply a few hundred , it ought to match into any finances.

  • Fast-connect compressor joints
  • Will not reduce rusty or painted steel
  • Non-arcing tip requires contact

2. Primeweld CUT50

Whereas it is not essentially the most full-featured possibility, the Primeweld CUT50 (appx. $299) is especially cheap and does a terrific job on skinny to mid-thickness gentle metal. It robotically detects voltage ranges and has brass-fitted air enter and output ports.

  • 50 amps of chopping energy
  • Three-year guarantee
  • Wants an adapter to make use of 110 volts

3. PrimeWeld CT520D

The PrimeWeld CT520D (about $399) is a really reasonably priced Three-in-1 unit designed to finish most residence customers’ DIY duties with nice effectivity. It switches simply between chopping and welding, enabling easy stick use for novices, in addition to a extra superior, TIG-style operation.

  • 50-percent obligation cycle in all modes
  • Accepts 110 to 220 volts
  • Doesn’t use contactless arcing

4. Hobart Airforce 40i

The highly effective Hobart Airforce 40i (about $1634) is appropriate for almost any residence or skilled want. It options an efficient auto-refire expertise that permits you to maintain chopping even by way of minor interruptions within the connection resulting from paint or rust.

  • Xt40r-model torch
  • Very best for the hardest jobs
  • Requires a 240-volt energy provide

5. Miller Spectrum 625 X-Treme

Appropriate for 120- and 240-volt electrical provides, the Miller Spectrum 625 X-Treme (about $1975) is a robust unit that may stand as much as skilled use. It is comparatively compact and is available in a high-impact ABS case that is good for transport to and from job websites.

  • Multi-voltage plug adapters
  • Could make very exact strains
  • An extremely pricey selection

6. Hypertherm Powermax 30 XP

Because of its extensive number of useful options, the Hypertherm Powermax 30 XP (appx. $1470) is effectively well worth the comparatively excessive price ticket. It contains the adapters you will want to make use of it with any voltage, and the inner circuitry adjusts accordingly.

  • Excessive-impact polymer case
  • Skilled-grade nozzles
  • Lengthy 15-foot lead

7. AHP AlphaCut

The AHP AlphaCut (round $949) gives top-of-the-line efficiency for a mid-range worth and, whereas it lacks the bells and whistles of some fancier decisions, it is a well-made machine that will not allow you to down. It switches simply from 110 to 220 volts for heavier-duty purposes.

  • Touchless pilot arc operation
  • Blow-back beginning mechanism
  • Above-average obligation cycle

8. Lotos LTP5000D

The Lotos LTP5000D (about $419) is among the finest entry-level choices for artists and residential metalworkers. Regardless of its low price, it is greater than succesful within the workshop, because of high-quality options like a steady arc and a most clean-cut of half of an inch.

  • Twin voltage and twin frequency
  • Comparatively light-weight at 26 kilos
  • Nice for carving sheet steel

9. PrimeWeld CUT60

Using 60 amps of present at 110 or 220 volts, the PrimeWeld CUT60 (about $649) is an effective deal in gentle of its potential to slice by way of inch-thick metal plate. It makes use of protected and simple blow-back beginning expertise and its pilot arc operation ends in very clear strains.

  • 60-percent obligation cycle
  • Able to drag chopping
  • Constructed-in cnc information port

10. Everlast PowerPlasma 50S

Artists and those that work on giant tasks might discover the Everlast PowerPlasma 50S (about $859) particularly helpful, because of an built-in CNC port that permits almost plug-and-play use with all kinds of high-precision, computer-controlled chopping machines.

  • Put up movement timer saves on consumables
  • Use with transportable or stationary rigs
  • Excessive-end ipt-60 torch