1. Aero Precision Ultralight 1″ Standard Scope Mount
- 6061 T6 Extruded Aluminum Construction
- Anodized Black
- Mil-Spec 1913 Picatinny Rails Upper Receiver
- 15 In-Lbs Screw Torque
- Standard Scope Mount Profile
- Included components: Scope mount, Torx screws
2. Vortex Optics Sport Cantilever 1-Inch Mount
- Use this cantilever mount for mounting 1-inch telescopic sights
- The 2-inch offset of this cantilever mount positions the scope in a forward location, allowing the correct eye relief and head placement
- The cantilever ring mount positions the center of the riflescope tube at a height of 1.59 inches (40.39 mm) from the base. Weighs 6.7 ounces
- Aluminum construction
3. TRUGLO TRU-Brite 30 Series 1-6 X 24mm Dual
- 1-6 x 24mm objective lens with rheostat controlled brightness; INCLUDED QUICK ZOOM LEVER; Generous 4-inch eye relief
- DUAL-COLOR ILLUMINATED RETICLE (red & green); Glass-etched reticle can be used without illumination (black)
- ONE-PIECE AIRCRAFT-GRADE ALUMINUM TUBE; water & shock resistant; fog-proof; LIMITED LIFETIME WARRANTY
- INCLUDES REVERSIBLE, OFFSET, MONOLITHIC 30MM SCOPE MOUNT made of CNC-machined aircraft grade aluminum; Includes 2 precalibrated BDC turrets in calibers .223 (55 grain) and .308 (168 grain) to engage targets up to 800 yards away
- MIL-DOT RETICLE enables user to determine the distance of objects of a known size and provides quick trajectory and wind drift aiming references (calibrated at 6x magnification)
4. Monstrum Slim Profile Series Offset Cantilever Picatinny Scope Mount
- Dual ring scope mount for mounting standard 1 inch tube rifle scopes
- Slim profile design offers the weight of lightweight scope rings with the added rigidity and convenience of a one piece mount
- Mounts to any flat top Picatinny rail equipped rifle
- 2 inches of forward extension allows extra flexibility for optimum eye relief and shooting position
- 5 ounces in weight and 5 inches in total length, with a base of 3 inches and 2.5 inches of spacing between the rings
5. MIZUGIWA 1inch /30mm Quick Release Cantilever Weaver Forward Reach Dual Ring Scope Mount
- Fits 20mm Picatinny Weaver rails
- Comes with 25.4mm reducer inserts so you can use this with 30mm and 25 mm (1 inch) body tube scopes.
- Built in Weaver style rails – very handy fitting flashlights and lasers etc.
- Front Lens Size: Up to 56mm – This figure describes the maximum size of the objective (front) lens.
- Scope Mount with Qick Detach Locks for Picatinny Weaver Rail
6. Monstrum Offset Cantilever Dual Ring Scope Mount
- Dual ring scope mount for mounting standard 1 inch tube rifle scopes
- Mounts to any flat top Picatinny rail equipped rifle
- 2 inches of forward extension allows extra flexibility for optimum eye relief and shooting position
- Lightweight 6061 grade aluminum construction
- All Monstrum Tactical optics mounts come with a lifetime guarantee
7. Monstrum Slim Profile Series Offset Cantilever Picatinny Scope Mount
- Dual ring scope mount for mounting standard 30 millimeter diameter tube rifle scopes
- Slim profile design offers the weight of lightweight scope rings with the added rigidity and convenience of a one piece mount
- Mounts to any flat top Picatinny rail equipped rifle
- 2 inches of forward extension allows extra flexibility for optimum eye relief and shooting position
- 5 ounces in weight and 5 inches in total length, with a base of 3 inches and 2.5 inches of spacing between the rings
8. MIZUGIWA 1 Inch High Profile Picatinny QD Scope Mount Rings
- 4-screw High Profile Scope Mount Ring, Precision Machined From Aluminum Alloy with Anodized Black Matte Finish
- Pair of (2) Fully Adjustable Military Grade High profile 1″ scope rings
- Robust design hold zero under extreme stress
- Extensively Field Tested under Extreme Operations and Well Received by Field Experts and Law Enfo
- Robust and User Friendly Ergonomic Quick Detach/Lock Lever Fully Adjustable to Fit on Any Picatinny Rail
9. TacStar Industries 1081240 Brass Catcher with Picatinny Rail Mount
- Clamps To The Firearm’S Picatinny Rail Section With A Low Profile Mounting Bracket
- Holds Up To 120 223 Cases
- Shell Bag Is Easily Removed For Emptying
- Heat Resistant Bag Will Not Degrade Due To Contact With Hot Spent Casings
10. Leupold 177093 Mark Ar 1″ Matte
- Lightweight Aluminum Design
- Punisher Tested And Verified
- Stanag Fit Which Means More Contact Area With The Picatinny Rail For An Exact Fit
11. Sailing Boat/Molly Mole/Soft Play/The Market
12. Monstrum Slim Profile Series Cantilever Offset Dual Ring Picatinny Scope Mount with Quick Release
- Dual ring scope mount for mounting standard 1 inch tube rifle scopes to Picatinny equipped rifles
- Slim profile design offers the weight of lightweight scope rings with the added rigidity and convenience of a one piece mount
- Attaches and detaches easily via integrated quick release mechanism, without additional tools or tightening
- 2 inches of forward extension allows extra flexibility for optimum eye relief and shooting position
- 5 ounces in weight and 5 inches in total length, with a base of 3 inches and 2.5 inches of spacing between the rings
13. Weaver Thumbnut Spr 1″ Mount
- Made of the highest quality materials
- Hunting scopes mounts
- Another quality Bushnell product
- Thumb-nut bolts for turning leverage
- Optimal height and forward cantilever for AR platform rifles
- Sleek design for low-profile mounting
- Four-hole ring design for added gripping power
- Rugged cross-lock base design for ultimate gripping strength
14. Monstrum Slim Profile Series Cantilever Offset Dual Ring Picatinny Scope Mount with Quick Release
- Dual ring scope mount for mounting standard 30 millimeter diameter tube rifle scopes to Picatinny equipped rifles
- Slim profile design offers the weight of lightweight scope rings with the added rigidity and convenience of a one piece mount
- Attaches and detaches easily via integrated quick release mechanism, without additional tools or tightening
- 2 inches of forward extension allows extra flexibility for optimum eye relief and shooting position
- 5 ounces in weight and 5 inches in total length, with a base of 3 inches and 2.5 inches of spacing between the rings
15. Burris Optics 410342, 410343, 410344 P.E
- Material Type: Aluminum
- Sport Type: Hunting
- Product Possess High Durability
- Made Of High Quality Materials
Tech specialist. Social media guru. Evil problem solver. Total writer. Web enthusiast. Internet nerd. Passionate gamer. Twitter buff.