Top 19 Best Wood Filament 3d Printers 2022 [Expert’s Reviews]

1. iSANMATE Wood Filament 1.75mm, PLA+ Wood Filament 1

iSANMATE Wood Filament 1.75mm, PLA+ Wood Filament 1

iSANMATE Wood Filament 1.75mm, PLA+ Wood Filament 1iSANMATE Wood Filament 1.75mm, PLA+ Wood Filament 1iSANMATE Wood Filament 1.75mm, PLA+ Wood Filament 1iSANMATE Wood Filament 1.75mm, PLA+ Wood Filament 1iSANMATE Wood Filament 1.75mm, PLA+ Wood Filament 1
  • 【Parameter】-iSANMATE Wooden PLA+ Filament Print Temperature:190℃-225℃. iSANMATE PLA+ filament dimensional: 1.75mm,accuracy +/- 0.03mm, 1KG (2.2LBS).
  • 【Wooden PLA+】- iSANMATE Wooden Filament is made up of 20% wooden flour and 80% PLA+ with wooden coloration and texture.Capable of make merchandise with woody contact
  • 【Excessive High quality】- iSANMATE Wooden PLA + filament has very good layer bonding, and energy and toughness are larger than standard PLA filament. Straightforward to make use of
  • 【Spool Measurement】- Spool Diameter:197mm(7.76″) ; Spool Width;64mm( 2.52″) – Spool Hub Gap Diameter: 57mm(2.24″).
  • 【100% Passable Service】-1 12 months guarantee. Present quick and environment friendly technical options when you could have any printing issues. With 24 hours assured reply.

Check Price Now

2. AMOLEN Wood Filament Bundle,Walnut,Bamboo Wood

AMOLEN Wood Filament Bundle,Walnut,Bamboo Wood

AMOLEN Wood Filament Bundle,Walnut,Bamboo WoodAMOLEN Wood Filament Bundle,Walnut,Bamboo WoodAMOLEN Wood Filament Bundle,Walnut,Bamboo WoodAMOLEN Wood Filament Bundle,Walnut,Bamboo WoodAMOLEN Wood Filament Bundle,Walnut,Bamboo Wood
  • 4 WOOD PLA FILAMENT BUNDLE – 4 totally different wooden PLA filament with Walnut wooden, Pink wooden, Bamboo and Ebony wooden, every filament spool is 200g.
  • REAL WOOD/BAMBOO FIBER – There’s 20% wooden fiber within the walnut wooden, purple wooden and ebony wooden PLA Filament. The sunshine coloration wooden has 20% bamboo fiber. Subsequently, you’ll get a print like an actual wooden with matte face and even wooden scent.
  • REFUSE TO CLOGGING – The finely floor wooden particles, double filtration, no impurities, make your printing smoother. Good shaping, no bubble, no jamming, no warping, no brittle.
  • HIGH COMPATIBILITY – Completely suitable with many of the FDM 3D Printer and 3D Pen, Comgrow Creality Ender, ANYCUBIC, Creality 3D, SUNLU, ERYONE, MYNT3D, 3Doodler, 1.75mm pla filament constant diameter, dimensional accuracy +/- 0.03mm.
  • VACUUM & REUSABLE BAG – Vacuum packaging with desiccant to maintain it dry and preserve out mud.The bag has a sealing strip,the pla filament could be put again into the bag after use and sealed for storage.
  • ONE MONTH WARRANTY – Any issues, please contact us without cost substitute or full refund. AMOLEN is dedicated to devolop high-quality and particular filament.
  • Print Temp: 190-200℃
  • Print Velocity: 30-60mm/s, 40mm/s will likely be higher

Check Price Now

3. AMOLEN Dark Wood Walnut PLA Filament 1.75mm

AMOLEN Dark Wood Walnut PLA Filament 1.75mm

AMOLEN Dark Wood Walnut PLA Filament 1.75mmAMOLEN Dark Wood Walnut PLA Filament 1.75mmAMOLEN Dark Wood Walnut PLA Filament 1.75mmAMOLEN Dark Wood Walnut PLA Filament 1.75mmAMOLEN Dark Wood Walnut PLA Filament 1.75mm
  • HIGH COMPATIBILITY: AMOLEN PLA Filament is suitable with many of the FDM 3D Printer, MakerBot, LulzBot, FlashForge, UP, Printrbot, Solidoodle, Reprap, Mendel, MakerGear.
  • PREMIER MATERIAL: Produced from PLA and wooden particles. Prints identical to regular PLA with attractive floor of wooden coloration and texture. Extrusion temperature vary: 190 – 220°C.
  • DIMENSIONAL ACCURACY: Diameter variance of not more than 30 microns for constant feeding and higher 3D prints.
  • SMOOTHLY PRINT: AMOLEN engineered its Skilled 3D Printer filament to strict tolerances and the best high quality requirements, guaranteeing trouble-free operation along with your 3D printer and superior outcomes. Good shaping, no bubble, no jamming, no warping.
  • HIGH PERFORMANCE: Orderly wrapped, soften effectively, feed easily and consistently with out clogging the nozzle or extruder. AMOLEN PLA filament is the selection of engineers, designers, and anybody else into 3D printing who calls for one of the best.

Check Price Now

4. Wood PLA Filament, Enotepad PLA Wood 3D Printer Filament 1

Wood PLA Filament, Enotepad PLA Wood 3D Printer Filament 1

Wood PLA Filament, Enotepad PLA Wood 3D Printer Filament 1Wood PLA Filament, Enotepad PLA Wood 3D Printer Filament 1Wood PLA Filament, Enotepad PLA Wood 3D Printer Filament 1Wood PLA Filament, Enotepad PLA Wood 3D Printer Filament 1Wood PLA Filament, Enotepad PLA Wood 3D Printer Filament 1
  • ▷ 【20% wooden fiber crammed】: Enotepad 1.75mm PLA wooden filament has 20% wooden fiber as a substitute of wooden powder. This ensures an actual wooden construction and texture. Meets the demand for wooden print fashions.
  • ▷ 【Low temperature Really useful setting】: 170-190 ° C (greatest temperature 180 ° C). Warmth mattress: 60 70 -70 ℃ (OR glue required). Purity PLA filament uncooked supplies and high-precision diameter tolerance, 1.75mm +/- 0.02mm. Strict management of the even PLA filament diameter and choice of top of the range uncooked supplies to keep away from jamming of the nozzles because of impurities and diameter.
  • ▷ 【Premium High quality 1.75MM Wooden Filament】: For clean extrusion. Even winding of the 3D printer filament with out tangling. The excessive toughness and powerful layer adhesion of the PLA wooden filament result in the primary completely printed layer.
  • ▷【Steady Diameter PLA】Purity PLA filament uncooked supplies and high-precision diameter tolerance, 1.75mm +/- 0.02mm. Strict management of the even PLA filament diameter and choice of top of the range uncooked supplies to keep away from jamming of the nozzles because of impurities and diameter.
  • ▷ 【Vacuum packing with desiccant】: Enotepad 1.75mm 3D printer filament is rigorously vacuum full of desiccant to make sure low moisture content material and to maintain mud and international objects away.

Check Price Now

5. HATCHBOX 3D Printer Filament, Dimensional Accuracy +

HATCHBOX 3D Printer Filament, Dimensional Accuracy +

HATCHBOX 3D Printer Filament, Dimensional Accuracy +HATCHBOX 3D Printer Filament, Dimensional Accuracy +HATCHBOX 3D Printer Filament, Dimensional Accuracy +HATCHBOX 3D Printer Filament, Dimensional Accuracy +HATCHBOX 3D Printer Filament, Dimensional Accuracy +
  • 1KG (2.2 lb) Spool
  • Wooden 3D Printer Filament Vacuumed Sealed With Desiccant
  • Really useful Extrusion/Nozzle Temperature 175°C – 220°C (347°F – 428°F)
  • 1.75mm Filament Diameter (Dimensional Accuracy +/- 0.03mm)
  • Spool Diameter: 7.88″ – Spool Width: 2.69″ – Spool Hub Gap Diameter: 2.20″

Check Price Now

6. AMOLEN Real Wood 3D Printer Filament Bundle

AMOLEN Real Wood 3D Printer Filament Bundle

AMOLEN Real Wood 3D Printer Filament BundleAMOLEN Real Wood 3D Printer Filament BundleAMOLEN Real Wood 3D Printer Filament BundleAMOLEN Real Wood 3D Printer Filament BundleAMOLEN Real Wood 3D Printer Filament Bundle
  • 【Wooden PLA Filament Bundles】 – Package deal embody 4 wooden filaments, Darkish Walnut Wooden PLA Filament 1.75mm, Bamboo Wooden,Pink Wooden,Ebony/Black Wooden, 3D Printer PLA filament Bundles, 200g every spool with woody contact, dimensional:1.75mm,accuracy+/-0.02mm.
  • 【Premium High quality Wooden Filament 】- Darkish Walnut Actual Wooden PLA Filament, purple wooden and ebony wooden are manufactured from PLA and accommodates 20% pure wooden powder, the sunshine coloration wooden has 20% bambbo Fiber, prints with wood-like floor of wooden coloration and texture. The print even smells like wooden. Superb for print flower pots for rising succulents or flower, or print tree, groot or different wood-like fashions.
  • 【Excessive Compatibility】 – AMOLEN 3D Printer Filament is Completely suitable with 99% FDM 3D Printer and 3D Pen, MakerBot, LulzBot, FlashForge, UP, Printrbot, Solidoodle, Reprap, Mendel, MakerGear, ANYCUBIC, Creality 3D, SUNLU, ERYONE,MYNT3D, 3Doodler.
  • 【Vacuum Sealed Packing 】- Wooden PLA Filament bundles include desiccant to maintain it dry and preserve out mud, a reusable bag with sealing strip, 3D Printer Filament could be put again into bag after used. The clear plate makes it simpler so that you can verify the filament coloration and the remaining filament.
  • 【100% After Gross sales Service 】- AMOLEN present skilled 3D printing technical steering for 3D PLA Filament and excellent customer support if in case you have any drawback about print or product. Faulty wooden filament could be reissued or refunded totally. Reply inside 24 hours.

Check Price Now

7. 3D Printer Filament Bundle, Pla Filament Wood Filament

3D Printer Filament Bundle, Pla Filament Wood Filament

3D Printer Filament Bundle, Pla Filament Wood Filament3D Printer Filament Bundle, Pla Filament Wood Filament3D Printer Filament Bundle, Pla Filament Wood Filament3D Printer Filament Bundle, Pla Filament Wood Filament3D Printer Filament Bundle, Pla Filament Wood Filament
  • ✔️【Parameter】-iSANMATE Wooden PLA+ Filament Print Temperature:190℃-225℃. iSANMATE PLA+ filament dimensional: 1.75mm,accuracy +/- 0.03mm, 250gX4
  • ✔️【Wooden PLA+】- iSANMATE Wooden Filament is made up of 20% wooden flour and 80% PLA+ with wooden coloration and texture.Capable of make merchandise with woody contact
  • ✔️【Excessive High quality】- iSANMATE Wooden PLA + filament has very good layer bonding, and energy and toughness are larger than standard PLA filament. Straightforward to make use of
  • ✔️【Spool Measurement】- Spool Diameter:197mm(7.76″) ; Spool Width;64mm( 2.52″) – Spool Hub Gap Diameter: 57mm(2.24″).
  • ✔️【100% Passable Service】-1 12 months guarantee. Present quick and environment friendly technical options when you could have any printing issues. With 24 hours assured reply.

Check Price Now

8. PRILINE 1kg Wood PLA Filament 1.75 3D Printer Filament

PRILINE 1kg Wood PLA Filament 1.75 3D Printer Filament

PRILINE 1kg Wood PLA Filament 1.75 3D Printer FilamentPRILINE 1kg Wood PLA Filament 1.75 3D Printer FilamentPRILINE 1kg Wood PLA Filament 1.75 3D Printer FilamentPRILINE 1kg Wood PLA Filament 1.75 3D Printer FilamentPRILINE 1kg Wood PLA Filament 1.75 3D Printer Filament
  • Priline wooden filament has wooden powder in it
  • Measurement: 1.75mm (Tolerance Stage : ± 0.03mm) – Spool Diameter: 7.87″ – Spool Width: 2.83″ – Spool Hub Gap Diameter: 2.20″
  • Really useful Printing Temp/Nozzle Temperature: 200-230°C (392-446°F), Base Plate Temperature: 0-50°C(32-122°F)
  • No extra sturdy nozzle want.However wooden filament requires a .6 or bigger nozzle to keep away from clogging
  • Refund Assure in 30 Days: We belief our merchandise. For those who aren’t proud of our 3D printer filament, inform us and We’ll prepare a refund for you

Check Price Now

9. Iverntech 1 Spool Acrylic 3D Printer Filament Holder Mount Rack for PLA

Iverntech 1 Spool Acrylic 3D Printer Filament Holder Mount Rack for PLA

Iverntech 1 Spool Acrylic 3D Printer Filament Holder Mount Rack for PLAIverntech 1 Spool Acrylic 3D Printer Filament Holder Mount Rack for PLAIverntech 1 Spool Acrylic 3D Printer Filament Holder Mount Rack for PLAIverntech 1 Spool Acrylic 3D Printer Filament Holder Mount Rack for PLAIverntech 1 Spool Acrylic 3D Printer Filament Holder Mount Rack for PLA
  • Iverntech 3d printer filament holder
  • Broadly used for many pla, abs, wooden, tpu, nylon, versatile filaments
  • A lot firmly design, will not fall down with every kind of filaments
  • The sticker paper could be peeled off earlier than assemble it
  • Filament pictured is for show goal solely, not included

Check Price Now

10. ZIRO Matte PLA Filament 1.75mm,1KG 3D Printer Filament

ZIRO Matte PLA Filament 1.75mm,1KG 3D Printer Filament

ZIRO Matte PLA Filament 1.75mm,1KG 3D Printer FilamentZIRO Matte PLA Filament 1.75mm,1KG 3D Printer FilamentZIRO Matte PLA Filament 1.75mm,1KG 3D Printer FilamentZIRO Matte PLA Filament 1.75mm,1KG 3D Printer FilamentZIRO Matte PLA Filament 1.75mm,1KG 3D Printer Filament
  • [ZIRO Matte PLA filament] The improbable frosted texture make your artworks much less plastic-feeling, extra superior magnificence. Trouble-free printing, no bubble, tangle-free, clog-free, as straightforward printing as common PLA filament.
  • [Recommended print settings] Extrusion/Nozzle Temperature 190-220℃, Warmth mattress 50-70℃, Print Velocity 30-70mm/s.
  • [Dimensional Accuracy and Consistency] Diameter tolerance at +/-0.03mm, Internet weight 1kg (2.2lbs) filament, suitable with most FDM 3D printers.
  • [Packaging] Vacuum sealed with desiccant. An additional reseal bag for storing used filament, a 5M cleansing filament, a 5M pattern filament coil.
  • [After-sales service] We’re at all times prepared to assist. ANY questions, please be at liberty to contact us, we’ll give you a passable resolution.

Check Price Now

11. Gizmo Dorks Wood Filament for 3D Printers 3mm

Gizmo Dorks Wood Filament for 3D Printers 3mm

Gizmo Dorks Wood Filament for 3D Printers 3mmGizmo Dorks Wood Filament for 3D Printers 3mmGizmo Dorks Wood Filament for 3D Printers 3mmGizmo Dorks Wood Filament for 3D Printers 3mmGizmo Dorks Wood Filament for 3D Printers 3mm
  • The 3D printing filament is PLA primarily based with wooden crammed materials that comes vacuumed sealed with desiccant
  • Extrusion nozzle temperature: 220 – 230 C; Really useful to make use of a heated construct platform
  • 2.85mm filament diameter (Dimensional Accuracy of +/- 0.03mm)
  • Internet weight: 200 grams / Spool Diameter: 5.125″ / Spool Width: 2″ / Spool Hub Diameter: 1.5″
  • Is available in a handy 200 gram pattern spool measurement to try to check, and the filament is suitable with most 3D printers reminiscent of Creality Ender 3, Monoprice Maker Choose, Lulzbot, Flash Forge, and plenty of extra.

Check Price Now

12. NOVAMAKER PLA Wood 3D Printer Filament 1

NOVAMAKER PLA Wood 3D Printer Filament 1

NOVAMAKER PLA Wood 3D Printer Filament 1NOVAMAKER PLA Wood 3D Printer Filament 1NOVAMAKER PLA Wood 3D Printer Filament 1NOVAMAKER PLA Wood 3D Printer Filament 1NOVAMAKER PLA Wood 3D Printer Filament 1
  • 【1kg Spool Wooden & 20g Cleansing Filament】 NOVAMAKER Improve Spool Wooden Filament is combination of 20% recycle wooden with polymer,Offers wood coloured and texture. 1kg Wooden filament combines actual wooden fibers, assembly your calls for for printing tasks of purposeful components with wood texture.
  • 【Much less Tangle】 Full mechanical winding and strict handbook examination, which assure the PLA filaments tidy,and solves the issue of printing interruption attributable to the knotting of the wire.After you have fully untangled the knot, that you must be sure to use a clip go the filament by a gap within the facet of the spool.
  • 【Dimensional Accuracy & Consistenc】This 1.75mm diameter PLA filament has been made with strict manufacturing requirements, so novamaker can guarantee that you just that its measurement stays constant all all through.And solves the issue of printing interruption attributable to the knotting of the filament.Works and harmonizes completely with all frequent 1.75mm FDM 3D printers.
  • 【Clog-Free, Bubble-Free】Full drying for twenty-four hours earlier than packaging.Novamaker use vacuum-sealed packaging bag for packaging 3d printer filament to maintain the humidity share at a minimal and managed. To keep away from clogging of the nozzles and effervescent.
  • 【All Lifetime Guarantee】Really useful Extrusion/Nozzle Temperature 190°C – 225°C,web weight 1kg spool. Quick and efficient 24 x 7 skilled buyer help offering technical resolution of novamaker wooden 3d filament.

Check Price Now

13. TECBEARS PLA 3D Printer Filament 1.75mm Wood

TECBEARS PLA 3D Printer Filament 1.75mm Wood

TECBEARS PLA 3D Printer Filament 1.75mm WoodTECBEARS PLA 3D Printer Filament 1.75mm WoodTECBEARS PLA 3D Printer Filament 1.75mm WoodTECBEARS PLA 3D Printer Filament 1.75mm WoodTECBEARS PLA 3D Printer Filament 1.75mm Wood
  • [Premium Wood Filament] TECBEARS wooden 3D filament has some great benefits of excessive purity with low shrinkage and very good layer bonding, assembly your calls for for various printing tasks. 100% manufactured from environment-friendly pure supplies, innocent to customers and the atmosphere.
  • [Clog-free & Bubble-Free] Utterly dried for twenty-four hours earlier than packaging and vacuum sealed with desiccants in nylon re-bag, allow a lot smoother and extra steady printing. For the reason that PLA filament is susceptible to moisture, please retailer it right into a re-sealable aluminum foil bag after unsealing to keep up wonderful printing efficiency.
  • [Less-tangle & Wide Compatibility] Full mechanical winding and strict handbook examination, which assure the PLA Wooden filaments tidy and straightforward to be fed. Works completely with most FDM 3d printers available on the market, reminiscent of MK3, Ender 3, Monoprice FlashForge and and so forth.
  • [Dimensional Accuracy & Consistency] Superior CCD diameter measuring and self-adaptive management system within the manufacturing guarantee strict tolerances. Diameter 1.75mm, dimensional accuracy + / – 0.02 mm with none exaggeration; 1 kg spool (2.2lbs)
  • [Printing Tips] Really useful Extrusion/Nozzle Temperature 200°C – 230°C, Mattress 60°C – 80°C. It is going to be your risk-free selection, please be assured that we’ll at all times stand behind our merchandise.

Check Price Now

14. HATCHBOX 3D Printer Filament, Dimensional Accuracy +

HATCHBOX 3D Printer Filament, Dimensional Accuracy +

HATCHBOX 3D Printer Filament, Dimensional Accuracy +HATCHBOX 3D Printer Filament, Dimensional Accuracy +HATCHBOX 3D Printer Filament, Dimensional Accuracy +HATCHBOX 3D Printer Filament, Dimensional Accuracy +HATCHBOX 3D Printer Filament, Dimensional Accuracy +
  • Package deal Dimensions: 7.6 cms (L) x 21.8 cms (W) x 7.6 cms (H)
  • Product Sort: Mechanical Elements
  • Package deal Amount: 1
  • Nation Of Origin: China

Check Price Now

15. WELLSHOW Wood 3D Printer Filament, PLA Wood Filament 1

WELLSHOW Wood 3D Printer Filament, PLA Wood Filament 1

WELLSHOW Wood 3D Printer Filament, PLA Wood Filament 1WELLSHOW Wood 3D Printer Filament, PLA Wood Filament 1WELLSHOW Wood 3D Printer Filament, PLA Wood Filament 1WELLSHOW Wood 3D Printer Filament, PLA Wood Filament 1WELLSHOW Wood 3D Printer Filament, PLA Wood Filament 1
  • Helps To Produce Excessive High quality Prints, Reduce Filament Issues.
  • Does Not Trigger Nozzle Clogs and Scale back Stringing
  • Printed Objects Have A Easy Look and Really feel
  • Nice Adhesion To the Print Mattress
  • Uniform Diameter 1.75mm and Dimensional Accuracy +/- 0.03 mm

Check Price Now

16. RANKI Wood PLA Filament 1.75mm 3D Printer Filament Rosewood

RANKI Wood PLA Filament 1.75mm 3D Printer Filament Rosewood

RANKI Wood PLA Filament 1.75mm 3D Printer Filament RosewoodRANKI Wood PLA Filament 1.75mm 3D Printer Filament RosewoodRANKI Wood PLA Filament 1.75mm 3D Printer Filament RosewoodRANKI Wood PLA Filament 1.75mm 3D Printer Filament RosewoodRANKI Wood PLA Filament 1.75mm 3D Printer Filament Rosewood
  • 👉🏻【Parameter】Really useful Printing Temp/Nozzle Temperature: 205-230°C (401-446°F), Base Plate Temperature: 40-60°C(104-140°F). Spool Diameter: 7.87″ – Spool Width: 2.83″ – Spool Hub Gap Diameter: 2.20″. Weight: 1 KG (roughly 2.20 lbs) Spool.
  • 👉🏻【Excessive High quality, Setting Pleasant】RANKI rosewood PLA filament has wooden powder in it,so the wooden odor will give off when printing. Prints identical to regular PLA with attractive floor of wooden coloration and texture.very good layer bonding, and energy and toughness are larger than standard PLA filament. Environmentally pleasant and straightforward to make use of.
  • 👉🏻【Huge Compatibility】1.75mm Diameter, Excessive Diameter Tolerance, Common Suitable with Various FDM 3D Printers in Market, (For instance MK3, Ender 3, BCN3D,Monoprice ,CR 10, Mega, Chiron,Ultimaker, FlashForge , and so forth.) Soften effectively and Feed Easily, Straightforward to Print.
  • 👉🏻【Printing Ideas】The Layer Ought to be Thicker Than 0.2mm ,no extra sturdy nozzle want,However Clear the nozzle earlier than printing OR simply use a 0.5mm or above nozzle to keep away from clogging.
  • 👉🏻【Satisfaction After-sale Service】In case you are not glad along with your buy for any motive, please be at liberty to achieve out to our pleasant buyer help workers. We’ll reply inside 24 hours and discover a decision to your satisfaction!

Check Price Now

17. CooBeen 3D Printer Filament, Wood PLA Filament with Build Surface Nozzle Cleaning Needle

CooBeen 3D Printer Filament, Wood PLA Filament with Build Surface Nozzle Cleaning Needle

CooBeen 3D Printer Filament, Wood PLA Filament with Build Surface Nozzle Cleaning NeedleCooBeen 3D Printer Filament, Wood PLA Filament with Build Surface Nozzle Cleaning NeedleCooBeen 3D Printer Filament, Wood PLA Filament with Build Surface Nozzle Cleaning NeedleCooBeen 3D Printer Filament, Wood PLA Filament with Build Surface Nozzle Cleaning NeedleCooBeen 3D Printer Filament, Wood PLA Filament with Build Surface Nozzle Cleaning Needle
  • 🎄【THE WOOD TEXTURE】CooBeen Wooden Filament is made up of 20% recycle wooden fiber with polymer. Capable of make merchandise with woody contact. Assembly your calls for for printing tasks of purposeful components with wood texture.
  • 🎄【THE ADVANTAGE】Prints with wooden texture even scent wooden.Good shaping, no bubble, no jamming, no warping. Feed easily and consistently,soften effectively. Guaranteeing trouble-free operation along with your 3D printer and superior outcomes.
  • 🎄【THE TEMPERATURE DIAMETER】Diameter 1.75mm, dimensional accuracy + / – 0.02 mm ,1 kg spool (2.2lbs).Really useful printing temp/nozzle temperature: 180°C-210°C(356℉-410℉), base plate temperature: 0°C-60°C(32℉-140℉).
  • 🎄【THE COMPATIBILITY】CooBeen PLA Filament is suitable with many of the FDM 3D Printer,LulzBot, FlashForge, Solidoodle, Reprap, Mendel, MakerBot, UP,Printrbot, MakerGear.
  • 🎄【THE PACKAGING 】100% Vacuum Packaging. Utterly dried earlier than packaging and vacuum sealed with desiccants in nylon bag, good vacuum packing ensures the filament are dry and in good toughness, not straightforward to interrupt. For the reason that PLA filament is susceptible to moisture, please preserve the 3D printer filament dry to keep up wonderful printing efficiency.
  • 🎄【WHAT YOU GOT】1* 3D Printer Filament + 1* Construct Floor + 1* 0.4mm Nozzle + 1* Cleansing Needle. Every PLA filament comes with 1 piece of 200 × 200 mm(7.88’’ × 7.88’’) construct floor to help CooBeen filaments. Nozzles are made of top of the range brass materials.Heavy responsibility and supply an extended service life .Useing cleansing needle to removes residue from PLA, PETG and different filaments by adhering to byproduct and particles left behind within the extruder, leading to smoother, extra correct fashions.
  • 🎄【WHAT WE PROVIDE】Pleasant After-Gross sales Service & Lifetime Product Consulting. You probably have any questions after receiving the product, please contact us first, we’ll offer you options to unravel the issue.For extra notes in regards to the product, you may obtain the product documentation to view, thanks!

Check Price Now

18. Geeetech PLA 3D Printer Filament, 1kg Spool

Geeetech PLA 3D Printer Filament, 1kg Spool

Geeetech PLA 3D Printer Filament, 1kg SpoolGeeetech PLA 3D Printer Filament, 1kg SpoolGeeetech PLA 3D Printer Filament, 1kg SpoolGeeetech PLA 3D Printer Filament, 1kg SpoolGeeetech PLA 3D Printer Filament, 1kg Spool
  • ✔️【Dimensional Accuracy & Consistency】– GEETECH PLA has strict tolerances. Diameter 1.75mm, dimensional accuracy +/- 0.03mm with none exaggeration. It really works and harmonizes completely with all frequent 1.75mm FDM 3D printers.
  • ✔️【1kg (2.2lbs) Spool】–Pack of 1 1kg/(2.2lbs) Wooden Colour pla. Spool measurement: Φ200mm/7.9″ flange, Φ56mm/2.2″ hub gap, 64mm/2.5″ width. Reel is appropriate for many fashionable printers, Comgrow, Geeetech, Longer, LABISTS, ANYCUBIC.and so forth
  • ✔️【Straightforward-to-Use, Clog-Free, Bubble-Free】– Really useful extrusion/nozzle temperature 185°C – 215°C (365°F – 419°F), scorching mattress 25°C – 60°C (77℉~ 140℉) . Works completely with all frequent 1.75mm FDM 3D printers.
  • ✔️【Vacuum Packing】– Vacuum sealed with desiccant to keep up low stage of moisture content material. And please preserve it dry and dust-free after after opening the sealed bundle to forestall it turns into brittle or jams the nozzle.Notice: an additional sealed bag is obtainable to retailer filament.
  • ✔️【100% Satisfaction Guarantee】GEEETECH supplies 100% Satisfaction Assure. In case you are not glad with this filament, please kindly contact us at ANY TIME.

Check Price Now

19. Polymaker Light Weight PLA Filament 1.75mm LW

Polymaker Light Weight PLA Filament 1.75mm LW

Polymaker Light Weight PLA Filament 1.75mm LWPolymaker Light Weight PLA Filament 1.75mm LWPolymaker Light Weight PLA Filament 1.75mm LWPolymaker Light Weight PLA Filament 1.75mm LWPolymaker Light Weight PLA Filament 1.75mm LW
  • 🚁 【Mild Weight PLA】 – PolyLite Mild Weight PLA is a low density PLA (0.8 g/cm3 evaluate to 1.17 g/cm3 for normal PLA). It prints utilizing the identical settings as common PLA(temperature and circulation charge), making it straightforward to print and suitable with most 3D printers. It is not going to foam when printing, this prevent from quite a lot of troubles introduced by lively foaming of conventional gentle weight PLA
  • 🛠️ 【Excessive Rigidity & Good Layer Adhesion】 – Our Polymaker gentle weight PLA has excessive rigidity and good layer adhesion so you may simply get some stiff components of radio managed airplane with it. PolyLite PLA is a worry-free 3D Printer Filament Wooden Low Weight PLA which has nice mattress adhesion, very constant coloration and dimension accuracy and no warping, no jamming, no blobs or layer delamination points. 【Notice – flip off the fan for the primary layer for improved mattress adhesion】
  • 🍀 【4 Colours Out there & Print Matte & Straightforward to Paint】 – PolyLite LW-PLA is available in white, black, gray and wooden. It prints a really matte floor end which hides the layers and make it straightforward to color, so you may get some distinctive lovely prints for your self or items to your pals
  • 🧵 【Tangle Free & Moisture Free】 – PolyLite PLA-LW is 3D printing filament rigorously winded to keep away from any tangling points, dried and vacuum sealed in a resealable ziplock bag with desiccant. Please ensure that to NEVER let go the tip of the filament as it could create nodes. Holes on the facet of the spool can be utilized to forestall this challenge
  • ⚙ 【Printing Settings】 – Nozzle: 190˚C; Mattress: 50˚C; Velocity: 50mm/s (Identical settings as common PLA) Chosen coloration: Mild Weight Wooden PLA filament 1.75mm ( LW-PLA Wooden Filament )
  • ⚠️ 【Essential Notice】 – Please ensure that to double verify the diameter of your order as it could mechanically change when deciding on a coloration. Chosen diameter: PolyLite Mild Weight PLA filament 1.75mm Wooden ( Mild Weight PLA filament Wooden )
  • 🛡️ 【RISK FREE & LIFETIME TECHNICAL SUPPORT】 – We provide a full refund if the product will not be performing as anticipated. Allow us to assist you get your good lovely prints and call us by way of Amazon anytime you want

Check Price Now