The 10 Best Nail Guns For Concrete 2020

s the identify implies, concrete nailers are used to drive fasteners into cement-based substrates. Whereas it’s potential to perform this similar factor with a hammer or powder-actuated instrument, these pneumatic- and gas-powered fashions are extra environment friendly and assist you to get the job executed considerably faster. Some are even appropriate for driving pins into thick metal, and most settle for a wide range of nail sizes

1. Apach LHT-64

The Apach LHT-64 (about $190) has a totally adjustable exhaust, so you will not always be getting hit within the face with blasts of air. It may be set to both sequential hearth or bump set off modes, permitting you to get the job executed utilizing probably the most appropriate methodology.

  • Feels properly balanced within the hand
  • Longevity is questionable
  • Struggles on older concrete

2. Air Locker CN64A3

The Air Locker CN64A3 (about $90) has a 60- to 100-PSI working vary, so there is no such thing as a must buy an costly high-pressure compressor, and it may drive each hardened and galvanized fasteners. Plus, its side-loading journal is simple to entry.

  • Nice worth for the worth
  • Would not push all nails flush
  • Typically causes blowouts

3. Freeman PSSCP

The Freeman PSSCP (about $143) can seat fasteners starting from three/four of an inch to three inches in size and has a particularly light-weight magnesium physique, coming in at only a contact over six kilos. It incorporates a industrial construct high quality, but the worth would not mirror that.

  • Single-piece drive blade
  • Accepts most manufacturers of pin
  • Not superb to be used on metal

4. Hitachi NC40G

The Hitachi NC40G (round $90) is about as reasonably priced as these instruments get, so it’s nice for the DIYer who would not plan on getting quite a lot of use out of it. It is powered by a 7.2-volt rechargeable battery and a gasoline cell, which means you will not have to fret a couple of cumbersome air hose.

  • Dry hearth prevention mechanism
  • Software-free jam clearing perform
  • Slip-resistant rubber grip

5. Freeman PCN65

The Freeman PCN65 (appx. $170) is designed for siding relatively than flooring, so it is not as highly effective as another fashions. This can be very environment friendly when used for the supposed utility, although, because it has a formidable 400-round coil journal and permits for depth changes.

  • Helpful belt hook
  • Properly padded grip
  • Non-marring tip

6. Bostitch MIII812CNCT

The Bostitch MIII812CNCT (round $530) has a big 66-fastener journal capability to chop down on the period of time you need to waste reloading. It’s a dependable, pneumatic-powered choice that matches comfortably in a single hand and infrequently, if ever, jams.

  • Constructed like a tank
  • Chip-resistant paint job
  • Considerably restricted in options

7. Max HN120 PowerLite

The Max HN120 PowerLite (appx. $965) produces 186 ft-lbs of driving drive to firmly seat fasteners, and it hardly ever ever causes blowouts. In addition to concrete, it may put pins into metal of as much as three/Eight-inch thick, and it has each a set off and nostril security lock function.

  • 360-degree swiveling inlet
  • Features a exhausting carrying case
  • Mud guard on the journal

8. Senco SCP40XP

The Senco SCP40XP (round $394) works with the common consumer-level compressor. It’s fairly light-weight, at roughly seven kilos, so many individuals will discover it simpler to maneuver than the heavier fashions, particularly when you do not typically do guide labor.

  • Slim nosepiece for tight areas
  • Environment friendly two-step loading course of
  • Straightforward to see when it is time to reload

9. Freeman PCTN64

The Freeman PCTN64 (round $149) has a troublesome die-cast aluminum physique and a rust-resistant journal, which ought to permit it to final by means of years of heavy use. It’s a versatile instrument that accepts 14-gauge fasteners starting from 5/Eight-inch to 2½-inches in size.

  • Adjustable exhaust route
  • Set off lock to forestall mishaps
  • Comes with a seven-year guarantee

10. Hilti GX120

The Hilti GX120 (round $1387) is costly, however their merchandise are sometimes thought-about the Rolls-Royces of instruments by professionals, so you probably have the cash, it’s price each penny. It’s a gas-powered mannequin and might drive over 700 fasteners on a single can.

  • Accepts a wide range of nail sizes
  • An unbelievable quantity of drive
  • Additionally appropriate to be used on metal