1. Baileigh DP-1250VS 20″ Heavy Duty Baileigh Drill Press
- PRECISE SPEED CONTROL: Digital readout displays spindle speed ranging from 85 to 2,000 rpm.
- REDUCED FLEXING: Wide column provides extra support even during the toughest drilling sessions.
- INCREASED RIGIDITY: Base and 22″ x 18.5″ table are made of a heavy iron casting.
- SECURE HOLDING: Very large .625″ T-slots let a vise or fixture hold your material.
- EXTENDED DRILL BIT LIFE: Coolant system, stored in the base, sprays out at the end of the spindle behind the splash and safety guard.
2. Baileigh DP-1500G 20″ Gear Head Drill Press
- 3.5 hp motor runs on 220 volt 3-phase power.
- Drills a maximum capacity of 1.5″ mild steel.
- Includes an auto tapping feature with a 1.3” capacity.
- Variable-speed drill press lets you select the correct setting for a project within the continuous range of 108 to 1800 rpm.
- Standard #4 Morse taper transfers power from the gear head to the material.
3. Baileigh 75-Ton Pneumatic Shop Press (HSP
- YEARS OF USE: Industrial-grade hydraulic components cleanly deliver force to any project.
- HANDS-FREE CONTROL: Integrated foot pedal makes this H-frame press easy to operate.
- EASY TABLE MOVEMENT: Winch and pulley system lets you lift and lower the working table to save time (and back strain!)
- ADDED VALUE: Comes standard with a V-block set.
- DELICATE CONTROL: Hand-operated lever gives you the option for more precise manual control.
4. Baileigh 50-Ton Pneumatic Shop Press (HSP
- SMOOTH AND DEPENDABLE USE: Industrial-grade hydraulic parts.
- PRECISE CONTROL: Manual hand pump on the side of press.
- ELIMINATES FLEXING AT FULL FORCE: Rigid, fully-welded steel main frame delivers accurate results.
- GREAT VALUE: Comes standard with a set of V-blocks.
- CONVENIENT CONTROL: Foot pedal allows for simple, hands-free machine control.
- EASY TABLE MOVING: Winch and pulley system lets you lift and lower the working table to save time (and back strain!)
5. Baileigh DP-1000G Gear Driven Drill Press
- ADJUSTABLE GEAR HEAD: Easily move the gear head on the column.
- 4-SPEED TRANSMISSION: 125/420/535/1740 rpm
- WILL RUN IN ANY FABRICATION SHOP: 1.5-HP motor requires 110 volts of power.
- ADDED SAFETY: Protective guard around the spindle.
- ACCURATE RESULTS: Sturdy 4″ diameter column reduces flexing.
6. Baileigh DP-15VSF Variable Speed Floor Drill Press
- Includes built in work light
- Depth stop on quill
- 12 spindle speeds
- 14″x18″ work table
- Drill chuck included
7. Baileigh DP-1000VS Variable Speed Drill Press
- 2 hp motor requires 220-volt single-phase power and will work at virtually any shop or site.
- Inverter-driven head drills a maximum capacity of 1” steel.
- You can fine-tune the speed in the range from 150 to 3000 rpm to suit your application.
- Auto-reversing tap has a tapping capacity of 5/8” steel.
- Wide steel column eliminates flexing even when drilling at full capacity.
8. Baileigh DP-1500VS Variable Speed Drill Press
- 220 Volts 1-pahse
- MT4 spindle taper
- 1-1/4-inches mild steel capacity
- Inverter driven head whose quill speed can be properly adjusted to each different drill size
- Power down feed
9. JET JWDP-12, 12-Inch Benchtop Drill Press
- DRILLING ACCURACY: X-shaped XACTA Laser ensures perfection every time.
- EASE OF USE: Oversized ergonomic knobs provide maximum control.
- CONSISTENT DRILLING: Clear, linear scale with depth stop.
- EXTRA SUPPORT: Retractable roller extension provides support and quick workpiece adjustments.
- COMPACT DESIGN: 10″ x 16-1/8″ cast iron base fits neatly on workbenches with limited space.
- INCREASED VISIBILITY: LED work light brightens your work area for intricate applications.
- ADDED SAFETY: Large paddle switch provides easy shut off and lockout protection.
10. Milescraft 1318 DrillMate Portable Drill Guide
- Perfect for straight or angled drilling, drilling on the edge of a board or on round stock
- Attaches to all 3/8″ And 1/2″ Power drills and it also includes a 3/8″ Capacity chuck with key
- Angle cuts of 45 Degree to 90 degrees, with a built in angle read out in the all metal base
- Centering channels built into the bottom of the base, to accommodate drilling any round stock up to 3 inches in diameter
- Adjustable depth stop and spring action control of the head
11. Milescraft 1312 DrillBlock- Handheld Drill Guide
- Centerlines ensure accurate alignment when drilling into various surfaces
- Non-slip feet holds the Drillblock in place while preventing both slipping and marring on wooden work pieces
- The two product v-grooves allow for usage on corners and even cylindrical surfaces too
- Package dimensions:3.05″L x 5.33″W x 14.48″H
12. TECCPO Cordless Drill Set, 20V Brushless Drill Driver Kit
- 【EFFICIENT BRUSHLESS MOTOR & HIGH PERFORMANCE 】Why choose us? Our drill adopts brushless motor, BRUSHLESS is totally better than brushed. For brushless motors no need to change carbon brush, which is more durable. Moreover, no sparks are generated during use. It’s safer and no noise, which is more comfortable to use. TECCPO brushless motors deliver 530 in-lbs torque stably. This brushless drill driver delivers up to 57% more runtime over brushed, high-performance, more durable.
- 【530 IN-LBS TORQUE & 2-SPEED & 21+1 CLUTCH 】This power drill with high performance motor to deliver 530 In-lbs max torque. Variable 2-speed(0-400RPM & 1500RPM) provides accurate control, satisfing different demands of the application. Our cordless drill can reach the max torque when used at low speed. With screw size, M5-M6, woodworking holes are larger than 25mm. 21 + 1 clutch provides precise control for driving in/out screws and drilling into wood, ceramics, plastics and even metal easily.
- 【 2Pcs 2000mAh Li-Ion BATTERIES & 1H FAST CHARGER 】 Brushless drill driver kit with 2Pcs 2000mAh large capacity Li-Ion batteries and 1 hour fast charger, can keep the brushless drill running continuously.The additional battery makes the compact electric screw driver always ready to use without restriction. This drill driver also has a power indicator to warn you of the state of battery, making your work more efficient and convenient.
- 【1/2″ ALL-METAL CHUCK & FORWARD/RESERVE SWITCH 】Compared with 3/8″ plastic chuck, 1/2”keyless metal chuck has unbeatable performance in providing maximum accessory compatibility and durability. Cordless drill set with the forward/reverse switch design, allows you to either screw or remove /replace bits on your purposes. This cordless drill also with ergonomic design of rubber-covered handle, which provides a comfortable grip for being breezily operated in one hand.
- 【COMPACT & LED LIGHT & 33 PCS ACCESSORIES 】This brushless drill driver weights only 3.37lbs with battery, which is perfect to reduce user fatigue and easy access to tight area. LED Light for illuminating the workspace when used in darker areas and ensuring work accuracy. TECCPO electric drill cordless with 33pcs premium accessories for multi-purpose, perfect for household reconstruction, renovation, garden work, DIY handcrafts or garage repairs, etc.
13. GRR-RIPPER 3D Pushblock for Table Saws, Router Tables
- Protect hands and prevent kickback like never before
- Powerful high-friction durable grip for extreme hold
- Precision cutting and control down to 1/4″ Ripping
- Fully adjustable for easy handling
- Work with small stock safely on the table saw, Router table, Jointer, & Band saw
- Designed in USA. A true MICROJIG Innovation.
- 3-Directional Force for total control of the workpiece
- Moving-Blade-Guard Hand protection
- Precise 1/4″ thin rips
- Virtually eliminates kickback
- Work with small stock safely
14. Mophorn 1200W Magnetic Drill Press with 9
- Superior Performance: Our portable drill press generates exceptionally strong power thanks to its 1200W copper motor. It is capable of drilling into the toughest materials at 550 RPM. Maximum Coring Diameter: 0.9 inches / 23 mm; Maximum Travelling Distance: 8.26 inches / 210 mm.
- 13500 N Magnetic Force: The powerful magnet can generate 13,500 N of holding force, ensuring the drill press machine does not move in the work. Our magnetic drill press anchor itself securely during work thanks to its electromagnet base.
- Efficient Cooling System: The dustproof air inlet and exhaust air holes are designed to effectively cool the magnetic drill press during overheating and lift the security to a higher level.
- User-friendly Design: Ergonomic design handle provides a comfortable grip in operation and transport. 3 extended crank handles are coated with nonslip rubber for labor-saving operation. The external carbon brush allows you to operate the mag drills with minimum effort.
- Various Applications: The electromagnetic drill press plays a vitally important role in shipbuilding, equipment manufacturing, equipment installation, bridge engineering, wind power generation, and other engineering facilities.
15. Milescraft 1097 ToolStand – Drill Press Stand
- Sturdy metal head fits most Dremel style rotary tools
- Spring loaded metal rack and pinion gearing for smoothe controlled drilling
- Scale with depth stop allows precised depth control and repeatability
- The steel 13-1/2″ support column of the ToolStand, fits securely into a 6″ x 6″ formed steel base plate whose surface and mounting platforms have been planed to ensure a level work surface
- Lock tools in horizontal position for hands free use
16. BLACK BLUEROCK Tools Model BRM-35A Typhoon Magnetic Drill Roto
- Drilling Capacity: 7/16″-1 1/2″ – 2″ depth
- Comes with Free Chuck, Adapter, Oil Bottle, Safety Chain and Case
- 120V, 60Hz, 595 RPM
- Uses Standard 3/4″ Weldon Shank
- BLUEROCK Tools Brand
Tech specialist. Social media guru. Evil problem solver. Total writer. Web enthusiast. Internet nerd. Passionate gamer. Twitter buff.